PRIVACY STATEMENT

※ Download: Line 6 pod x3 live service manual

Amp, Stomp, Mod, Delay, Verb —... Just follow these easy steps. This level is saved and recalled with each preset.

To select a block from the Home Page, use the 4-way Nav button to get to the one you want. Unfortunately the only way to clean the pot is to open the amp up and try to spray some Servisol Super 10 in through the small opening in the pot case. Use this control to set the correct balance between Tone 1 and Tone 2.

PRIVACY STATEMENT - Note that the Loop can only be on for one Tone at a time, and turning the Loop on for one Tone automatically forces it off for the other. Just press, choose what to store and where to store it, and press the button again to complete the Save.

Select Knob — Home Page — turn to pick a different Model. This works for the Amp, Stomp, Mod, Delay, Reverb, and Edit Page — Wah edit pages. Just press, choose what to store and where to store it, and press the button again to complete the Save. Press and hold to turn Dual Tone on or off. Amp, Stomp, Manuual, Delay, Verb —. The System page lets you set it all up. This works for the Amp, Stomp, Mod, Delay, Reverb, and Edit Page — Wah edit pages. Just press, choose what to store and where to store it, and press the button again to complete the Save. When you are ready to connect a Variax, use only Line 6 supplied Variax-compatible lines — not standard Ethernet or other cables — to avoid damage to the jack. Variax — this input provides power and a direct service audio connection between a Line 6 Variax knob. When you are ready to connect a Variax, use only Line 6 supplied Variax-compatible cables — not standard Ethernet or other cables — to avoid damage to the jack. To select a block from the Home Page, use the 4-way Nav button to get to the one you want. Use this control to set the manual balance between Tone 1 and Tone 2. This level is saved and recalled with each preset. Instant digital chromatic tuner for Tone 1. Select Knob — once the Type has been selected, turn the Select Knob to pick an Amp Model. The Model names will appear at the top of the display. Guitar Amp Model Tone Controls: Bass — bass tone control. Mid — mid tone control. Treble — treble tone control. Pres — presence control, which brightens your tone. Quick descriptions for the various parameters that appear for different Models are listed below. Decay — sets how fast or slow the effect trails off. Time — for mono delays, sets the time for the delay line; for stereo delays, sets the time manuall the left side lice line. Bits — for Low Rez Delay, lets you adjust the delay anywhere from 12 bit resolution down to as few as 4 truly live bits. Lo Fq — sets the corner frequency of the low-shelf filter, affecting all sound at and below the frequency you select. Note that the Loop can only be on for one Tone at a time, and turning the Loop on for one Tone automatically forces it off for the other. Tone1 — servjce an input to get routed pod Tone 1. Just follow these easy steps. On the Updates tab, look to see if Line 6 Monkey itself is up to date.

Edicion de efectos EN POD X3 LIVE (PARTE 1) EN ESPAÑOL
Press and hold to turn Dual Tone on or off. To select a block from the Home Page, use the 4-way Nav button to get to the one you want. If you are not an experienced service engineer then take it to someone who is! This level is saved and recalled with each preset. Pres — presence control, which brightens your tone. Quick descriptions for the various parameters that appear for different Models are listed below. On the Updates tab, look to see if Line 6 Monkey itself is up to date. Mid — mid tone control. Guitar Amp Model Tone Controls: Bass — bass tone control.